Installation Method

[Edit]  This method is now deprecated in favor of the USB Bootable Media Toolbox.  This post remains  for historical reference only.  [08/31/13]

Here's a rather verbose & needlessly complex explanation of how I test Linux Distros on the Acer C7.  However, I think it should work with any Chromebook capable of booting from USB, but might require modification in some cases.  It is and will always be a "work-in-progress", so please let me know if something isn't clear.

Requirements

     1. A Chromebook in "Developer Mode."
     2. Same Chromebook running Developer Firmware.
     3. Same Chromebook with USB Boot enabled.
     4. USB bootable media (thumb drive or SD card).  From 4 - 16 GB will suffice.  16 GB will match the internal storage of every Chromebook prior to the Pixel, except for the Acer C7.  So, you could duplicate your SSD for development purposes.  See Tips #1 & #3 for relevant info.

The Method

     A. From ChromeOS, use cgpt to create a GPT partition table on your media (I'm using a 16GB SD card in the reader slot), add a kernel partition #6 which is 16 MB in size, and add a rootfs partition #7 using the remaining space.  Something like this:

cgpt create /dev/mmcblk0
cgpt show /dev/mmcblk0
       start        size    part  contents
           0           1          PMBR
           1           1          Pri GPT header
           2          32          Pri GPT table
    31537119          32          Sec GPT table
    31537151           1          Sec GPT header
cgpt add /dev/mmcblk0 -i 6 -b 34 -s 32768 -t kernel -l KERN-C -P 1 -T 1

The size of partition #7 here is the beginning sector of "Sec GPT table" (31537119) MINUS the beginning sector of partition #7 (32802).  Yes, the font is very tiny, but it preserves the appearance of the output.

cgpt add /dev/mmcblk0 -i 7 -b 32802 -s 31504317 -t rootfs -l ROOT-C
cgpt show /dev/mmcblk0

       start        size    part  contents

           0           1          PMBR

           1           1          Pri GPT header

           2          32          Pri GPT table

          34       32768       6  Label: "KERN-C"

                                  Type: ChromeOS kernel

                                  UUID: B6BF18B8-5B01-384F-AA69-7AD61AB56646

                                  Attr: priority=1 tries=1 successful=0

       32802    31504317       7  Label: "ROOT-C"

                                  Type: ChromeOS rootfs

                                  UUID: F33BC249-4577-D94A-8B7B-5B13D68DE423

    31537119          32          Sec GPT table

    31537151           1          Sec GPT header

Please note that (at least on the C7) although you can use the built-in card reader to create such media, you may be unable to boot from it without an external USB card reader.  At least, I haven't been able to.  So, it may be more practical to simply use a thumb drive. See Tip #3 for a theory.

     B. Create a debugging-enabled kernel from the current kernel, copy it to partition #6 and prioritize it to boot once.  See Tip #2 for an explanation here.

rootdev -s
    /dev/sda3
dd if=/dev/sda2 of=kernel_2.blob
dump_kernel_config kernel_2.blob > kernel_2.cfg
cp kernel_2.cfg kernel_debug.cfg

Now, replace the contents of kernel_debug.cfg with the following:

add_efi_memmap 
boot=local 
console=tty1 
disablevmx=off 
i915.modeset=1 
init=/sbin/init 
kern_guid=%U 
loglevel=7 
lsm.module_locking=0 
rw 
root=PARTUUID=%U/PARTNROFF=1 
rootwait 
tpm_tis.force=1 
tpm_tis.interrupts=0

These are commandline arguments passed to the kernel, so they should only be separated by spaces.  Here, I've alphabetized them on separate lines for clarity.  Now, wrap the new kernel with the verified block and  the new config:

vbutil_kernel --repack kernel_debug.blob \
  --keyblock /usr/share/vboot/devkeys/kernel.keyblock \
  --version 1 \
  --signprivate /usr/share/vboot/devkeys/kernel_data_key.vbprivk \
  --config=kernel_debug.cfg \
  --oldblob kernel_2.blob

Make sure the new kernel verifies OK and finally copy it to partition #6 and prioritize it.

vbutil_kernel --verify kernel_debug.blob
dd if=kernel_debug.blob of=/dev/mmcblk0p6
cgpt add /dev/mmcblk0 -i 6 -P 1 -T 1

     C. Boot your chosen distro on another machine (real or virtual) and install it onto partition #7 of your bootable media.  In some cases, you may need to create a filesystem on partition #7 prior to the installation, so I do just in case.  I've used both Ext2 and Ext4 successfully.  Either skip installing a bootloader or attempt to place the bootloader on partition #7.  I assume the distro must support GPT disks in order for this to work.

     D. Double check the GPT partition table for any changes that might prevent booting.

     E. Copy the necessary stuff from the current Chrome OS rootfs to partition #7.  Include the following complete folders:

/lib/firmware
/lib/modules
/usr/share/vboot

And these files as well:

/usr/bin/cgpt
/usr/bin/dump_kernel_config
/usr/bin/vbutil_*

Overkill perhaps, but handy for working on kernels from Linux too.

     F. Cross your fingers, reboot & attempt to boot from USB.  If it boots, reprioritize partition #6 and mark it as having booted successfully.

cgpt add /dev/sdb -i 6 -P 1 -T 0 -S 1


I adapted this method from the technique published by Olof Johannson, a member of the Chrome OS development team.

A Beginning

Prior to the introduction of the Pixel, running Linux on a Chromebook has required using the Chrome OS [CrOS] kernel with another distro's root file system.  As I understand it, Jay Lee, the developer of ChrUbuntu, recently switched from 32-bit (<=11.10) to 64-bit (>=12.04) Ubuntu which required him to substitute the Open Source Chromium OS kernel for the CrOS kernel distributed by Google.  Numerous issues with ChrUbuntu and a general lack of support led me to wish that I could switch back to Google's official (and constantly evolving) 32-bit kernel for CrOS.

Based primarily on the belief that Chromebook users would be better off sticking with Google's current CrOS kernel, I began testing 32-bit x86 Linux distros on my Acer C7. So far, the results of my experiments have been encouraging - not only does 32 bit Ubuntu 12.04.1 run without issues but it seems that most distros with Debian and/or Ubuntu lineage do as well.  Results with other distros have been mixed.  One key factor seems to be the use of initrd, which the CrOS kernel apparently does not support.  Keep in mind that I'm only reporting that these distros install and boot using my method because I did not test them extensively.



x86 Distros on the C7

Here, I'll attempt to document my method so that others can benefit.  IMHO, the distros I've highlighted represent the best match for the C7's hardware and resources.

In the meantime, I highly recommend checking out the Crouton script method developed by David Schneider.  It essentially enables you to run Ubuntu as an application on CrOS.  Credit for this find goes to Craig Errington.